Installing the Driver and Software
7
3 Select
Search for the best driver for your device
(Recommended)
, and then click
Next
.
4 Select
Floppy disk drives
, and then click
Next
.
Windows finds the driver file for the device.
5 Click
Next
.
Files are copied.
If the Insert Disk dialog box appears, prompting you to
insert
EtherDisk
diskette 1, click
OK
.
You are prompted for
EtherDisk
diskette 2.
6 Remove
EtherDisk
diskette 1 from drive A, insert
EtherDisk
diskette 2, and then click
OK
.
Files are copied. You are prompted for the Windows 98 CD.
7 Insert the Windows 98 CD or diskette, and then
click
OK
.
If the Windows 98 installation files are on your hard drive,
click
OK
. Enter the directory in the Copy files from entry box
(usually C:\WINDOWS\OPTIONS\CABS), and then click
OK
.
Files are copied. The installation is complete when you are
prompted to click
Finish
.
8 Click
Finish
.
You are prompted to restart the PC.
9 Remove
EtherDisk
diskette 2 from drive A, and then
click
Yes
to restart the PC.
You must reboot the PC to complete the installation.
The installation is complete. See the next section,
“Verifying Successful Installation,” to confirm that the
NIC is properly installed.
After Windows restarts, double-click the Network icon
in the Windows Control Panel and make sure that the
configuration settings are properly configured for your
network environment. Contact your system administrator
for assistance.
