3Com EtherLink III ISA 3C509B-COMBO, Руководство пользователя

Страница: 69 / 110

Installing Multiple NICs in a Windows NT PC 5-5
11 Click Close .
The Microsoft TCP/IP Properties screen appears.
12 From the Adapter box, select 3Com EtherLink III 3C509 ISA
Adapter , select a method of assigning the TCP/IP address,
and then click OK .
Messages are displayed, and you are prompted to reboot
Windows NT.
13 Click Yes .
The NIC is installed and configured. The next step is to install the
remaining NICs.
Installing Subsequent NICs
Follow this procedure to install the remaining NICs, one at a time,
after you install and configure the first NIC:
1 Perform steps 1 through 5 of the preceding procedure.
The Windows setup program displays a message warning that a
network card of this type is already installed.
2 Click OK .
The 3Com EtherLink III (3c509) ISA Adapter Bus screen appears.
A message warns you to use the Network window to install
multiple NICs.
3 Click OK .
Files are copied, and the Network screen reappears.
4 Ensure that 3Com EtherLink III 3C509B ISA is selected, and
then click Properties .
The 3Com EtherLink III Adapter Card Setup dialog box appears,
showing the assigned I/O port address value.
5 Set the I/O port address to a nonconflicting value, and then
click
OK .
The 3Com EtherLink III (3C509) ISA Adapter Bus screen
appears again.
6 Click OK .
The setup program displays a warning message.
7 Click OK , and then click Close .
Files are copied, and then the Microsoft TCP/IP Properties
screen appears.