3Com Courier, Справочник

Страница: 67 / 204

Accessing the Host 9-3
Other Remote-Access
Commands
The table below is a list of remote-access configuration commands.
Example: Sending
AT%P1=
will erase the view and change password
WARNING: If you erase the%P1 password without disabling remote
access (using
ATS41=0
), anyone could access the Courier V.Everything
modem and change its configuration.
Accessing the Host
At the Guest Device The guest device requires no configuration to access the host. Follow
these steps:
1 Be sure that the host device has enabled remote access and is set to
auto-answer (
ATS0=1
). Know the password, if you will need one.
2
Call the host device (although it doesn’t matter which device originates
the call).
3 After a connection is established, do this:
a Pause 4 seconds.
b Type 4 tildes: ~~~~
c Pause 4 seconds.
The administrator of the host device can change the remote-access
character using S-Register 42, and the pause duration using S-Register
43. See Appendix A,
S-Registers for more information.
For your modem to Command
Display a view-only password
AT%P0?
Display a view-and-change password
AT%P1?
Erase a view-only password
AT%P0=
Erase a view-and-change password
AT%P1=
Disable remote access entirely
ATS41=0