3Com 4200G PWR Скачать руководство пользователя

Страница: 47 / 104

Setting Up Command Line Interface Management using SSH

Check you can communicate with the Switch by entering a

ping

command at the DOS prompt in the following format:

c:\ ping xxx.xxx.xxx.xxx

(where xxx.xxx.xxx.xxx is the IP address of the Switch)

If you get an error message, check that your IP information has been
entered correctly and the Switch is powered up.

To open a Telnet session using the DOS prompt, enter the IP address of
the Switch that you wish to manage in the following format:

>telnet xxx.xxx.xxx.xxx

(where xxx.xxx.xxx.xxx is the IP address of the Switch)

If opening a Telnet session using third party software you will need to
enter the IP address in the format suitable for that software.

At the login and password prompts, enter

admin

as your user name and

press Return at the password prompt (or the password of your choice if
you have already modified the default passwords).

If the login prompt does not display immediately, press Return a few
times until it starts.

If you have logged on correctly, the Switch you wish to manage is
displayed as

, as shown in Figure 13 on page 40.

Setting Up
Command Line
Interface
Management using
SSH

This section describes how you can set up Command Line Interface
management using SSH over a network.

To manage a Switch using the command line interface over a network
using SSH:

Ensure you have already set up the Switch with IP information as
described in “Methods of Managing a Switch” on page 32.

Check that you have the IP protocol correctly installed on your
management workstation. You can check this by trying to browse the
World Wide Web. If you can browse, the IP protocol is installed.

Check you can communicate with the Switch by entering a

ping

command at the DOS prompt in the following format:

c:\ ping xxx.xxx.xxx.xxx

(where xxx.xxx.xxx.xxx is the IP address of the Switch)

If you get an error message, check that your IP information has been
entered correctly and the Switch is powered up.

10014914AA.book Page 47 Friday, July 7, 2006 2:08 PM

Содержание 4200G PWR









































































































Результаты поиска

Содержание 4200G PWR

Отзывы:

Похожие инструкции для 4200G PWR

Бренды по названию

Популярные бренды

3Com 4200G PWR, Руководство по началу работы

Результаты поиска

Содержание 4200G PWR

Отзывы:

Похожие инструкции для 4200G PWR

Бренды по названию

Популярные бренды