3Com 3CRWEASYA73 / WL-575 Скачать руководство пользователя страница 210

Страница: 210 / 335

6-78

HAPTER

6: C

OMMAND

INE

NTERFACE

•

host_name -

Name of the host. (Range: 1-63 characters)

•

community-string

- Password-like community string sent with the

notification operation. Although you can set this string using the

snmp-server host

command by itself, we recommend that you define

this string using the

snmp-server community

command prior to using

the

snmp-server host

command. (Maximum length: 23 characters)

Default Setting

Host Address: None

Community String: public

Command Mode

Global Configuration

Command Usage

The

snmp-server host

command is used in conjunction with the

snmp-server enable server

command to enable SNMP notifications.

Example

Related Commands

snmp-server enable server (6-77)

snmp-server trap

This command enables the access point to send specific SNMP traps
(i.e., notifications). Use the

form to disable specific trap messages.

Syntax

snmp-server trap

trap>

no snmp-server trap

trap>

•

trap

- One of the following SNMP trap messages:

dot11InterfaceAFail

- The 802.11a or 802.11g interface has failed.

dot11InterfaceGFail

- The 802.11b/g interface has failed.

dot11StationAssociation

- A client station has successfully associated

with the access point.

dot11StationAuthentication

- A client station has been successfully

authenticated.

dot11StationReAssociation

- A client station has successfully

re-associated with the access point.

AP (config)#snmp-server host 1 10.1.19.23 batman

AP (config)#

Содержание 3CRWEASYA73 / WL-575
















































































































































































































































































































































Результаты поиска

Содержание 3CRWEASYA73 / WL-575

Отзывы:

3Com 3CRWEASYA73 / WL-575, Руководство пользователя, Страница: 210 / 335

Результаты поиска

Содержание 3CRWEASYA73 / WL-575

Отзывы: