3Com 3CRWEASYA73 / WL-575 Скачать руководство пользователя страница 163

Страница: 163 / 335

6-31

Using the Command Line Interface

autoupgrade directory

This command specifies the directory in which to search for firmware updates on
the local PC designated to be an auto-upgrade server.

Syntax

autoupgrade

directory

drive

•

drive

- Specifies a drive or folder on which to look for firmware upgrades.

Default Setting

none

Command Mode

Global Configuration

Example

This example specifes the “d” drive to perform an auto-upgrade search in.

autoupgrade IP

This command specifies the servers on which to search for firmware upgrades.

Syntax

autoupgrade

]

IP_address

•

1~4

- The server on which to search for updates, up to a maximum of 4.

IP_address -

Specifies the IP address of the auto-upgrade server in the

form xx.xx.xx.xx. Using 0.0.0.0 disables communication.

NOTE:

Firmware files used with this feature must be in the following format;

A73_xx_yy_zz_sh.img (shipping version), or A73_xx_yy_zz_ww.img (world wide version).

AP (config)#autoupgrade directory d:

AP (config)#

NOTE:

Due to memory limitations access points cannot function as auto-upgrade

servers. Only local drives on PCs may serve this function.

Содержание 3CRWEASYA73 / WL-575
















































































































































































































































































































































Результаты поиска

Содержание 3CRWEASYA73 / WL-575

Отзывы:

3Com 3CRWEASYA73 / WL-575, Руководство пользователя, Страница: 163 / 335

Результаты поиска

Содержание 3CRWEASYA73 / WL-575

Отзывы: