3Com 3CRWEASYA73 / WL-575, Руководство пользователя, Страница: 194 / 335

6-62
C
HAPTER
6: C
OMMAND
L
INE
I
NTERFACE
show hardware
This command displays the hardware version of the system.
Command Mode
Exec
Example
System Logging Commands
These commands are used to configure system logging on the access point.
Table 13 System Loggign Commands
logging on
This command controls logging of error messages; i.e., sending debug or error
messages to memory. The
no form disables the logging process.
Syntax
[ no ] logging on
Default Setting
Disabled
Command Mode
Global Configuration
AP #show hardware
Hardware Version Information
===========================================
Hardware version R01
===========================================
AP #
Command Function Mode Page
logging on Controls logging of error messages GC 6-62
logging host Adds a syslog server host IP address that will receive
logging messages GC 6-63
logging console Initiates logging of error messages to the console GC 6-64
logging level Defines the minimum severity level for event logging GC 6-64
logging facility-type Sets the facility type for remote logging of syslog
messages GC 6-65
logging clear Clears all log entries in access point memory GC 6-66
show logging Displays the state of logging Exec 6-66
show event-log Displays all log entries in access point memory Exec 6-67