3Com 3C8S5007 - SuperStack II PathBuilder S500..., Руководство пользователя

Страница: 156 / 190

156 A
PPENDIX
G: C
OMPLETING
T
HE
U
LTRA
-WAN C
ONFIGURATION
# no timeslots assigned so that deletions are not required.
# Most likely, the timeslots mapping needs to differ from
# this default setting. The sequence of commands given
# below will allocate the timeslots on a one-to-one
# basis with each of the 31 paths.
ADD !E1CHAN1 -PA ChannelMap 1
ADD !E1CHAN2 -PA ChannelMap 2
ADD !E1CHAN3 -PA ChannelMap 3
ADD !E1CHAN4 -PA ChannelMap 4
ADD !E1CHAN5 -PA ChannelMap 5
ADD !E1CHAN6 -PA ChannelMap 6
ADD !E1CHAN7 -PA ChannelMap 7
ADD !E1CHAN8 -PA ChannelMap 8
ADD !E1CHAN9 -PA ChannelMap 9
ADD !E1CHAN10 -PA ChannelMap 10
ADD !E1CHAN11 -PA ChannelMap 11
ADD !E1CHAN12 -PA ChannelMap 12
ADD !E1CHAN13 -PA ChannelMap 13
ADD !E1CHAN14 -PA ChannelMap 14
ADD !E1CHAN15 -PA ChannelMap 15
ADD !E1CHAN16 -PA ChannelMap 16
ADD !E1CHAN17 -PA ChannelMap 17
ADD !E1CHAN18 -PA ChannelMap 18
ADD !E1CHAN19 -PA ChannelMap 19
ADD !E1CHAN20 -PA ChannelMap 20
ADD !E1CHAN21 -PA ChannelMap 21
ADD !E1CHAN22 -PA ChannelMap 22
ADD !E1CHAN23 -PA ChannelMap 23
ADD !E1CHAN24 -PA ChannelMap 24
ADD !E1CHAN25 -PA ChannelMap 25
ADD !E1CHAN26 -PA ChannelMap 26
ADD !E1CHAN27 -PA ChannelMap 27
ADD !E1CHAN28 -PA ChannelMap 28
ADD !E1CHAN29 -PA ChannelMap 29
ADD !E1CHAN30 -PA ChannelMap 30
ADD !E1CHAN31 -PA ChannelMap 31
#
# ChannelBaud: This parameter specifies the baud rate (56K or 64K) of
# each timeslot (i.e. channel) mapped to the
# specified path. Default setting is CB64K (64kbits/sec).
# This setting can be changed to CB56K (56kbits/sec) for
# leased-line paths that require 56kbit/sec operation
#
# Some examples on changing the ChannelBaud parameter setting are:
#
# SETDefault !E1CHAN13 -PAth ChannelBaud = CB56K