A-2
A
PPENDIX
A: A
BOUT
C
ARD
S
ERVICES
3Com recommends that you load Card and Socket Services
into upper memory by using the DEVICEHIGH statement to
load these programs. Consult your Card Services
documentation for more information. For example, type:
DEVICEHIGH=C:\<directory name>\SS365SL.EXE
DEVICEHIGH=C:\<directory name>\CS.EXE
If Your Computer Does Not Have Card Services
The 3C689 adapter has intelligent drivers and configuration
software that detect the presence of Card Services. If
Card Services is not present, then the adapter automatically
uses its built-in point enabler to manage system resources.
Avoiding Memory Manager Conflicts
If you are running Card Services, you may need to inform the
memory manager already loaded on your computer of the
address range used by the 3C689 adapter. To inform the
memory manager, follow these steps:
1
Make a backup copy of the CONFIG.SYS file. Type:
Copy CONFIG.SYS CONFIG.OLD
2
Use a text editor to edit out the startup command for the
memory manager located in the CONFIG.SYS file. The
startup command will look similar to this:
device=c:\windows\emm386.exe noems
To edit out this command, type REM in front of it:
REM device=c:\windows\emm386.exe noems
3
Save the CONFIG.SYS file and reboot the computer.
4
Insert the
TokenDisk
diskette into the floppy drive and
make that drive the active drive. For example, type:
A: [Enter]
5
At the prompt, type:
Install [Enter]
