3-2
C
HAPTER
3: U
SING
THE
A
UTO
L
INK
F
EATURE
FOR
N
ET
W
ARE
■
Modifies the CONFIG.SYS, AUTOEXEC.BAT, and NET.CFG files.
(The previous versions of these files are renamed
CONFIG.3CM, AUTOEXEC.3CM, and NET.3CM.)
If you want to configure the adapter manually, see Chapter 4,
“Standard Installation and Configuration.”
AutoLink Requirements
Verify that you meet the following requirements in addition
to those stated in the Introduction.
■
The 3C689 adapter must be installed in your computer and
connected to the network.
■
NetWare on the server must be version 2.2 or higher.
■
You must have an account on the target NetWare server, with
an assigned user ID and password, or you will not be able to
log in to the server after running the AutoLink program.
■
You must have a minimum of 2 megabytes of free memory
on your hard disk drive.
AutoLink Options
■
A 3Install account on the server allows the AutoLink program
to download the NetWare client software from the server
instead of from the
TokenDisk
diskette. This feature can be
used to install newer versions of the software or to customize
your installation.
Installation instructions for creating the 3Install account and
preparing the server can be found in the
A:\QINSTALL\SERVER\README.TXT file on the
TokenDisk
diskette.
■
An AUTOLINK.CFG file can be used to control the AutoLink
process. The AUTOLINK.CFG file in the
TokenDisk
diskette’s
root directory contains default settings and descriptions of
the control parameters.
