1-2
C
HAPTER
1: I
NTRODUCTION
3C689 Adapter Features
The 3C689 adapter ships with an unshielded twisted-pair
(UTP) cable and a shielded twisted-pair (STP) connector.
The 3C689 adapter features include:
■
Automatic adapter configuration.
■
Compliance with IEEE 802.5 standards.
■
100% IBM
â
compatibility (uses IBM-designed chip set).
■
Compliance with PCMCIA Release 2.01 standard, Type II form
factor.
■
Integrated Card Services support (also works without
Card Services).
■
“Hot Swap” support (you can remove and reinsert the
adapter without rebooting the computer).
The
TokenDisk
â
diskette is supplied with the adapter. It
includes the AutoLink
ä
automatic installation program, the
Configuration and Diagnostic Program, DOS and OS/2 drivers,
and driver agents for Transcend PC Link SmartAgent software.
3C689 Adapter Requirements
Before you can install the adapter successfully, you must
meet the following requirements:
■
Your computer must have the PCMCIA Release 2.01, 16-bit
Type II or Type III card slot and a 3 1/2-inch diskette drive.
■
Your computer must be running DOS 3.1 or higher.
■
Your computer must have an 80286 or higher processor.
■
You must be physically connected to a UTP or
STP network port.
