3Com 3C421600A, Руководство по управлению

Страница: 79 / 300

Configuring RAS 1500
77
4 Configure if RAS 1500 uses the asynchronous control character map to
filter incoming data. Use the following command:
set network user <name> ppp receive_acc_map [hex_number -
array of 4 bits]
Example:
set network user tom ppp receive_acc_map 0
5 Configure if RAS 1500 uses the asynchronous control character map to
filter outgoing data. Use the following command:
set network user
<name> ppp transmit_acc_map [hex_number -
array of 4 bits]
Example:
set network user tom ppp transmit_acc_map 0
6 Configure how often PPP should examine packets to decide when to
renegotiate the optimum compression algorithm.
Use the following command:
set network user <name> ppp reset_mode_co [auto |
every_packet | every_error]
Example:
set network user tom ppp reset_mode_co auto
7 Configure the ML-PPP channel values. Use the following commands:
set network user <name> ppp channel_decrement [0-100]
set network user <name> ppp channel_expansion [0-100]
set network user <name> ppp max_channels [0-8]
Example:
set network user tom ppp channel_decrement 20
set network user tom ppp channel_expansion 60
set network user tom ppp max_channels 1
8 Save your work.
Table 16 PPP Packet Actions and Parameters
PPP Action Parameter
Renegotiate the entire PPP session if RAS 1500 does not
negotiate a PPP session
auto
Examine every packet
every_packet
Examine a packet every time PPP detects an error
every_error