3Com 3C421600A, Руководство по управлению

Страница: 195 / 300

NOS Authentication
193
To enable remote authentication (in this case, NOS), use the following CLI
command:
enable authentication remote
To disable remote authentication, use the following CLI command:
disable authentication remote
Displaying Authentication Settings
To display authentication settings, use one of the following commands:
show authentication settings
or
show configuration
Setting the Time Zone
Use the following command to specify the time zone (GMT offset) of the
RAS 1500. This setting is between -12:00 and +14:00, inclusive.
set timezone <+/-hh:mm>
See Appendix A, “GMT Time Zones” to find the GMT offset for your
location.
Eastern United States example:
set timezone -5:00
Setting Daylight Saving Time
Configuring daylight saving time (DST) on the RAS 1500 requires two
steps. First, set the begin time, end time, and adjustment for DST.
Second, enable DST.
Only those time zones impacted by DST need to enable this parameter.
Use the following command to set specify when DST begins and the time
adjustment to make:
set dst on week_of_month <1-5> day_of_week <day> month
<month> time_to_correct <time> amount_to_correct <amount>