3Com 3C421600A, Руководство по управлению

Страница: 43 / 300

Preparing the RAS 1500 for Web-based Management
41
Preparing the RAS
1500 for Web-based
Management
Before you can manage a RAS 1500 using the Web Management
Interface, the RAS 1500 must have an IP address assigned to it. Out of
the box, the RAS 1500 does not have an IP address.
This procedure lets you assign an IP address, network mask, and
community string to the RAS 1500.
To assign an IP address to a device:
Before you start this procedure, confirm the RAS 1500 is connected to
the same LAN segment as the workstation on which you are running the
IP Wizard.
1 Insert the SuperStack II Remote Access System 1500 Resource CD into the
CD-ROM drive. The RAS 1500 Setup Screen appears.
If your PC does not automatically run the CD, perform the following
steps:
a At the Windows 95 or NT desktop, click Start, then click Run.
b In the Run dialog box, type the following:
<your CD drive
letter>:\setup
c
Click OK. The RAS 1500 Resource CD Splash Screen displays as shown
in Figure 1.