62
C
HAPTER
8: C
ONFIGURING
FOR
L
OAD
B
ALANCING
Defining a Server
Subnet
Before you can add a server, you need to have defined at least one server
subnet. The default gateway of each server must be set to the floating
default gateway address of the Server Load Balancer.
To define a server subnet, complete the following steps:
1
Click
Logical View
on the Toolbar.
2
From the Navigation tree, select
Server Load Balancing > Setup -> Server
Subnets
.
3
Click
Add
. The first wizard page appears.
4
Click
Next
. The
Server Subnet - Define Subnet
page appears.
5
Enter
192.168.2.254
in the IP Address field.
If configuring for a redundant configuration, you need to enter the IP
addresses of both Device A and Device B.
6
Enter
255.255.255.0
in the Subnet Mask field.
7
Click
Next.
The
Server Subnet - Device A Floating Address
page appears
8
Complete the entry in the
Floating Address
field. For example,
192.168.2.200
.
Do not forget to change the default gateway on your servers to this IP
address
9
Click
Finish
. Your server subnet has been added.
slb_gsg.bk Page 62 Thursday, May 31, 2001 8:57 AM
Содержание 3C16120 - SuperStack 3 Server Load Balancer
