3Com 3C16115-US - SuperStack 3 Webcache 1000 Скачать руководство пользователя | Manualshive

Страница: 104 / 176

background image

104

C

HAPTER

11: S

OFTWARE

U

PGRADE

AND

I

NSTALLATION

system configuration file includes a record of the Webcache software
version that was running when the configuration was saved.

The Restore Configuration operation restores the system configuration
from the file to the Webcache. It checks that the system configuration
being restored was created on the same Webcache software version as
the one that the Webcache is running.

Example

You perform a software upgrade and experience problems with the
Webcache. You now want to return the Webcache to a previous working
software version. You need to install the previous software version and
then restore the configuration that you saved prior to commencing the
upgrade.

To do this, you need to install the software image of the previous
software version. This is available either on the CD supplied with the
Webcache or on the 3Com FTP site. The same software image is used for
installation and for upgrades.

You need to perform a software installation to return the Webcache to a
previous working software version. All of the Webcache’s configuration
settings are lost after a software installation has been completed, except
the IP and DNS configuration. You should now browse to the Webcache’s
Web interface and restore the system configuration file that you saved
the last time the Webcache was running this older software version. You
would perform the Restore Configuration command to go back to a fully
configured Webcache running the previous software version.

If you had not previously saved a system configuration file for the older
software version, you would still be able to install a previous software
image, but you would have to re-enter all of the configuration settings.

CAUTION:

You cannot restore a system configuration which was created

on a different software version to the version that the Webcache is
currently running.

Example

: You save a configuration when the Webcache is running

software version 1.00. You later perform a software upgrade to version
1.01 and attempt to restore the 1.00 system configuration to the
Webcache. The Web interface will not allow you to restore the
configuration.
Therefore you should save a configuration file for each different software
version that you run on the Webcache. If you need to go back to an

«
...
102
103
104
105
106
...
»

Содержание 3C16115-US - SuperStack 3 Webcache 1000

















































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 3C16115-US - SuperStack 3 Webcache 1000

EonServ 5000 Series

Бренд: Surveon Страницы: 33

SUPERO SuperServer 1018L-MP

Бренд: Supermicro Страницы: 104

Бренд: Jung Страницы: 16

Бренд: Xblue Networks Страницы: 42

Бренд: Black Box Страницы: 30

SuperServer 1029P-MT

Бренд: Supermicro Страницы: 123

Бренд: LOOQS Страницы: 69

Force10 MXL Blade

Бренд: Dell Страницы: 2

FileStore N8300

Бренд: Symantec Страницы: 55

Бренд: netAlly Страницы: 2

Бренд: CNET Страницы: 14

NovaScale T860 F2

Бренд: Bull Страницы: 36

Бренд: Avaya Страницы: 270

Бренд: XtendLan Страницы: 54

Бренд: ClearCube Страницы: 2

IntraPort A00-1869

Бренд: Compatible Systems Страницы: 44

Rackable C2110G-RP5

Бренд: Silicon Graphics Страницы: 78

Rackable C2112-4G3

Бренд: Silicon Graphics Страницы: 104

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды