3Com 3C10220 - Ethernet Power Source Supply, Руководство пользователя

Страница: 33 / 44

Solving Wireless Access Point Problems 33
Faulty EPS
■
Follow the procedures
described in Table 6 to
determine if the EPS is faulty.
The Wireless Access Point is
receiving power, but the
network indicator (center
LED) does not flash. Faulty network
connection
■
Check all physical connections
between the Wireless Access
Point and the LAN (network).
Check patch panels, premises
wiring, hubs, and switches.
If none of these procedures identifies the problem, contact an authorized 3Com
service representative for additional assistance.
Table 8
Solving Wireless Access Point Problems (continued)
Problem Possible Cause Suggested Action