3Com 3C10220 - Ethernet Power Source Supply, Руководство пользователя

Страница: 14 / 44

14 C
HAPTER
1: 3C
OM
E
THERNET
P
OWER
S
OURCE
O
VERVIEW
Rear Panel
Connections
Figure 3 shows the EPS rear panel.
Figure 3 Ethernet Power Source — Rear Panel
Information Label To facilitate reporting any future problem, record here the Part Number
(P/N) and Serial Number (S/N) of the EPS from the unit information label
on the rear panel.
■
Part number: ______________________
■
Serial number: _____________________
Console Port Use the Console Port to connect a remote (or local) terminal and perform
remote (or local) management. This port does not carry Ethernet traffic.
The Console Port uses a standard null modem cable. The port settings are
fixed and have these values:
■
Baud Rate: 9600
■
Data Bits: 8
■
Parity: None
■
Stop Bit(s): 1
If you are upgrading the firmware on the EPS using a local computer
connected by a null modem cable, the upgrade program configures the
communications port that you select on your computer (COM1 is the
default) to match these settings.
You can obtain the firmware upgrade program and instructions for using
it from this web site:
http://support.3com.com/
Look for the Network Telephony Products area.
CONSOLE PORT
9600, 8, 1, N
DC INPUTS: 24Vdc/16Amp max.
ONLY FOR USE WITH SPECIFIED
POWER SUPPLY.
REFER TO INSTRUCTIONS MANUAL.
SUPPLY DATA
V~
100-120/200-240 60/50
Hz A
3/1.5
Caution: Shock Potential. Disconnect
the Power Before Servicing.
Power Source Unit
P/N ..................
S/N ..................