Visiondome HD Installation Manual V2.1.29
Page 26
7 Network Settings Recovery
When network settings are changed, the IP address, Net Mask and Gateway are validated before they are
saved. However if the settings are such that the Visiondome-HD has settings which mean that it cannot be seen
on the user’s network, it may become necessary to use the ‘Network Settings Recovery’ feature as described
below.
The ‘Network Settings Recovery’ IP address may conflict with an IP address that is already defined on the
network, it may be necessary to disconnect the Visiondome-HD from the network and control it locally using a
network connection to a laptop so that the IP address can be set to a suitable setting before the Visiondome-HD
is reconnected to the main network.
Procedure for ‘Network Settings Recovery’
If necessary disconnect the Visiondome-HD from the main network.
Turn power to the Visiondome-HD OFF for 3 seconds.
Turn power to the Visiondome-HD ON for 4 seconds.
Repeat the above five times.
On the final power ON, leave the power switched on for at least 5 minutes to allow the Visiondome-HD to
initialise.
(See section Locating the Visiondome-HD on your network - page 5).
8 Special Presets
Night Sensor
(When it is dark)
Seek 67
(Mono)
Seek 68
(Colour)
Night Focus Range
(When it is dark)
Seek 69
(Ambient)
Seek 70
(IR)
De-Fog
Seek 87
(On)
Seek 88
(Off)
Power on Park
Define/Seek 150
Program/Recall Power on Park preset position.
Home
Define 360
Defines Home Position
