Visiondome HD Installation Manual V2.1.29
Page 21
© 360 Vision Technology Ltd.
802.1x Authentication
• Authentication - Tick to enable 802.1x. Options to choose MD5 or TLS and add username/password.
SNMP
• Enabled - Enables Simple Network Management Protocol.
OK
to apply the new settings into the Visiondome-HD.
Cancel
to abandon the changes to the network settings.
6.2.8 Interfaces
Auxiliary Functions
Allows the camera to be configured to use ONVIF Auxiliary commands.
Features available are:-
• Dark Sensor Mono - Sets the camera to a mono image, when dark.
• Dark Sensor Colour - Sets the camera to a colour image, when dark.
• Dark Focus Ambient - Sets the camera focus (when in mono), to suit the scene when ambient light is
present.
• Dark Focus IR - Sets the camera focus (when in mono) to suit the scene when IR light is present.
• De-Fog On - Switches camera De-Fog feature on.
•
De-Fog Off - Switches camera De-Fog feature off.
• Force Night Settings - Used to set camera to night/dark settings.
• Force Day Settings - Used to force camera to day/light settings.
•
Disable Forced Settings - Switch off forced settings, camera to use settings as per light level.
• Force Mono Settings - Force camera into mono, no lamps, ambient focus range.
• Force HLC On - Switch on HLC option.
•
Force HLC Off - Switch off HLC option.
• Iris Open - Opens the camera iris.
• Iris Close - Closes the camera iris.
• Iris Auto - Switches on auto iris.
• Iris Manual - Sets camera to manual iris mode.
• Power Low - Sets the motors to use low power.
• Power On - Sets the motors to use full power.
Dark relates to when the camera is in dark mode, see section Camera - Night Changeover - page 15.
