Visiondome HD Installation Manual V2.1.29
Page 18
© 360 Vision Technology Ltd.
6.2.5 PTZ Zones
The PTZ zones page, offers options to:-
• Camera - Cannot be edited, shows label/name given to the camera.
(See Video - Camera - page 10).
Set Text Overlays using the below options
(see also Video - page 10)
:-
• 1-16 - Set up to 16 text overlays.
• Pan - Used to set pan axis as the trigger for the text overlay to be displayed.
• Tilt - Used to set the tilt axis as the trigger for the text overlay to be displayed.
• Start Preset - Set start preset for text overlay.
• End Preset - Set end preset for text overlay
• Text - Input required text for sector zone overlay.
PTZ buttons can be used to move the camera so that simple preset positions can be programmed or recalled.
PTZ position co-ordinates are also shown, use the refresh button to refresh the data if the camera has been
moved.
PTZ position co-ordinates can also be added manually, use the go button to send the camera to the coordinates
set.
•
Preset Seek/Define - This will allow admin and operator user levels to seek or define presets (Viewer
user level can only seek presets).
(See Advanced Features - Presets - page 13)
• List all Presets - Use to show all presets or programmed presets in drop down selection box.
OK
to apply the new settings into the Visiondome-HD.
Cancel
to abandon the changes to the PTZ zones settings.
