360 Vision Centurion Скачать руководство пользователя страница 3

Страница: 3 / 22

Centurion Installation Manual Ver 2.7

Page 3

1 Safety and Precautions

1. Please read these notes before attempting to operate the 360 Vision Centurion, and keep for future

reference.

2. DO NOT disassemble or remove covers. This will break the water seals and invalidate the warranty.

3. All servicing and repairs must be handled by 360 Vision Technology.

4. Avoid pointing the camera directly towards a bright light source (sunlight), or expose the camera to intensive

light situations as this may damage the camera pick-up device.

5. Installation should be carried out by suitably qualified personnel, in accordance with local codes of practice

and regulations.

6. 360 Vision Technology Limited accept no liability for any damage caused by incorrect or improper installation.

7. To prevent risk of injury caused by the Centurion or mounting options becoming detached, fit a suitable safety

chain or lanyard.

8. Connection of data signals and power should only be made using a pre-made Centurion Composite cables.

9. Use only 360 Vision Centurion power supplies. These have suitable terminals for all the wires in the

Centurion composite cable.

10. Please handle the Centurion with care, as improper handling may cause damage within this unit.

2 Housing Dimensional Drawing

Centurion No Lamps

MUST NOT BE REPRODUCED OR SHOWN TO

DO NOT SCALE

ALL DIMENSIONS IN MM

REMOVE ALL SHARP EDGES

SHEET:

DESCRIPTION

SCALE:

PERMISSION OF THE AUTHOR.

ANY THIRD PARTY WITHOUT THE DIRECT WRITTEN

C COPYRIGHT PROTECTED AND

THIS DRAWING AND ALL COPIES ARE

PART NUMBER:

1.000

3 OF 4

TOLERANCES:-

X = 0.5

X.X = 0.1

X.XX = 0.05

3rd ANGLE PROJECTION

360 Vision Technology Ltd.

Unit 7, Seymour Court,

Manor Park, Runcorn, Cheshire,

WA7 1SY. United Kingdom.

www.360visiontechnology.com

328 PAN SWEEP

TILT

SWEEP

250

237

392

MOUNTING BASE

125

(x4) ON

101.6 (4 INCH) PCD

330

NAME:

M3100-B

CENTURION ASSEMBLY

ISS DATE

REFERENCE

A 130815

FIRST ISSUE

B 210815 UPDATED VIEWS

130815

DATE :

K.CRAIK

RELEASED:

APPROVED:

ENGINEER:

MATERIAL:

FINISH:

SCALE 0.4

MOUNTING

BASE

WITHOUT LIGHTS

Weight 7kg

Содержание Centurion























Результаты поиска

Содержание Centurion

Отзывы:

Бренды по названию

Популярные бренды

360 Vision Centurion, Руководство по установке и настройке

Результаты поиска

Содержание Centurion

Отзывы:

Бренды по названию

Популярные бренды