manualshive.com logo in svg

360 Systems MAXX-2400-HD, Руководство по эксплуатации, Страница: 102 / 148

Поделиться
Скачать
360 Systems MAXX-2400-HD Скачать руководство пользователя страница 102

 

MAXX-2400HD Owner’s Manual 

Page 101 

 

Managing Disk Arrays 

The Image Server’s Disk Array Configuration Utility provides tools for monitoring and 

managing the disk array.  Monitoring and troubleshooting programs automatically check the array, 
report problems and provide access to RAID status information and service options.  

If up to two drive faults should occur, it should not cause data loss; but remember that the 

drive array is degraded and no longer has fault tolerance.  Hence, another disk failure will cause a 
complete loss of data and system failure.  After a drive failure it is strongly recommended that at 
the earliest time diagnostics be performed. 

Error Notification and Repair 

The server will notify users in the event of a fault by flashing the front panel 

DRIVES

 light.  A 

failure condition will also be indicated in the Image Server GUI in the status bar, on the bottom of 
the screen and highlighted in yellow ( Figure 44 ).  A GPIO Output can be programmed to activate 
upon a RAID or system fault. This can be used to activate a warning lamp or alarm. Refer to Page 
65 for more information on programming GPIO events. A drive fault can be trigged by a variety of 
conditions.  The first step in response to an error warning is to open the RAID 

CHECK STATUS

 

window from the On-Screen Start Menu.  Click 

Start > RAID Status

 to launch the RAID Array 

Configuration Utility.   

 

Figure 44 - GUI Drive Fault Indication 

 

The 

RAID Maintenance

 window (Figure 47) displays the current status of the RAID controller 

and all disks connected to the RAID system.  On inspection, you will find the array in one of the 
following states: 

•

 

OK

, indicated by "OK" for Array Unit 0 and all Ports (drives); 

•

 

Initializing

, indicated by "Initializing" on the Array Unit 0 status line; 

•

 

Degraded

, indicated by "Degraded" on the Array Unit 0 status line; 

•

 

Verifying

, indicated by "Verifying x%" on the Array Unit 0 status line. 

•

 

Rebuilding

, indicated by "Rebuilding x%" on the Array Unit 0 status line. 

 

Содержание MAXX-2400-HD





















































































































































Отзывы:

Нет отзывов