360 Systems MAXX-1200-HD, Руководство по эксплуатации

Страница: 40 / 148

MAXX-1200 Owner’s Manual Page 39
Setting the Audio Input Source
Select
OPTIONS >CONFIGURE
from the Channel 1 Transport Window. The Dialog box in
Figure 5 appears.
•
Select an
Audio Input
by clicking the desired button.
•
Click
APPLY
or
OK
.
Embedded audio is eight tracks contained in the HD-SDI input video stream.
AES/EBU Digital Audio refers to audio I/O from the optional DXP-2 multi-channel module.
Analog Audio refers to audio I/O from the rear panel XLR-3 connectors.
Arming Audio Tracks
Select
OPTIONS >CONFIGURE
from the Channel 1 Transport Window.
Refer again to Figure 5 - Channel Configuration Dialog. Under
TRACK ARM
, check
AUDIO
to
record audio. All eight tracks are recorded.
Click
APPLY
or
OK
Setting an Audio Delay Time
Audio tracks can be offset from video in 1 millisecond increments up to +/- one second. The setting
is per channel and non-volatile. It applies to playback only, not recording.
You must stop and start the playback to hear the result of a change. This adjustment is made in
Transport mode; once set it also applies to Playlist mode on that channel.
Select
OPTIONS >CONFIGURE
from the Channel Transport Window. The Dialog box in 10
appears.
Click the
OUTPUT
tab.
Enter a time offset value in the window.
Click
APPLY
or
OK
.