360 Systems MAXX-1200-EX, Руководство по эксплуатации

Страница: 47 / 148

Page 46 MAXX-1200 Owner’s Manual
Ejecting a Clip
Ejecting a clip effectively removes it from the transport. The channel will output Black. Press
EJECT
if desired.
Using Jog
The
JOG +
command will move to the next frame and go to Still. The
JOG -
command will
move to the previous frame and go to Still.
Using Go To Frame and the Frame Locator
Click the arrows
|<
or
>|
to go to the next trim point (Mark In or Mark Out) in the selected
direction. When in Edit mode, an additional click in the selected direction will go to the actual
beginning or end of the entire clip.
To use the Frame Locator slider, either select Go To from the
Options Menu of the Transport you are using, or type
Ctrl+G
with the desired Transport selected (click anywhere in the
Transport window to select it - its title bar will turn blue.)
Using the mouse, drag the slider to move rapidly through the
video file. Or, type a specific frame location into the Destination
field. You can type just as much of the location as necessary, by typing frames, seconds and
frames, minutes and seconds and frames, or hours and minutes and seconds and frames. (You
can type the colons but they are not required.) Press
Enter
when done. The video will jump
to the specified frame (if it exists) and the Destination Field will become selected again to allow
another location to be entered.
Using Fast Forward / Rewind
F-F
(Fast Forward) and
REW
(Rewind) buttons transport program material at high speed in the
chosen direction. Four speed choices are available in each direction. Click the button repeatedly
for: 4x, 16x, 64x, and 128x. Audio does not play at any speed /- 2X.
Slow Motion Playback
The MAXX-1200 will play smooth slow-motion video in forward or reverse, at any speed from
zero to 2X. Direction can be instantly changed, using either the GUI or a desk-top controller.
Audio is also played at these lower speeds. At speeds beyond 2X, video frames will be selected
as needed, yielding a chunky result; audio is muted at high speeds. Most slo-mo playback for
sports and other uses lies well within the 2X zone.
To play in slow motion from the GUI, press PLAY and then move the shuttle slider to the desired
speed—within a range of 2X forward or reverse. See the following section for details on the