manualshive.com logo in svg

360 Systems MAXX-1200-EX, Руководство по эксплуатации, Страница: 29 / 148

Поделиться
Скачать
360 Systems MAXX-1200-EX Скачать руководство пользователя страница 29

 

Page 28 

MAXX-1200 Owner’s Manual 

Basic Operations 

This section introduces the Graphic User Interface (GUI), its menus and operating controls.  If 
you want to skip ahead to learn how to record a clip, go to page 38.  Skip to page 45 to read 
about playing a clip. 
The graphic user interface is a convenient way to manage server operations.  With it, you can 
control recording and playout, set up video and audio formats, map remote control ports to video 
channels, perform editing and make playlists.   
The GUI is operated with a keyboard, mouse, and monitor connected to the server rear panel.  

During the first power on the system must be connected to a keyboard, monitor and mouse

.  

The server will ask you to accept the Software Licensing Agreement before it will operate.  This 
screen will only appear during the initial startup. 

The Server Desktop 

The server desktop is similar to many computer graphic interfaces.  A task bar and start menu 
appear at the bottom of the screen.  Use the Start menu button to launch applications, manage 
the system or to shut down the server. 

Launching the Graphic User Interface 

The GUI launches automatically during boot up.  If it has been closed, click 

Start

, then select 

Image Server GUI

 to re-launch it.  The GUI window can be moved or minimized as desired. 

Shutting Down the Server 

Click 

Start

, then 

Shutdown

, then select either 

Shutdown

 to begin an orderly shutdown, or 

Full 

Restart

 to do an orderly shutdown and Restart (without a full power down). 

Alternatively, momentarily pressing the front panel power button will cause the system to begin 
an orderly shutdown.  The server will acknowledge the button press with an audible beep and 
the front panel lights will begin to flash together.  Any operation in progress will be halted, and 
any unsaved work will be lost. 
In most cases the power will shut off automatically.  However, if the front panel lights begin to 
blink the file system has been properly closed and it is safe to force the power off by holding the 
front panel button in for 4 seconds. 
If the system has stopped responding to commands and will not reset by pressing the front panel 
button, press and hold the button for four seconds to force a power down.  Wait 5 seconds, and 
then the system may be restarted with another press of this button. 

DO NOT

 use the rear panel power supply switch to shutdown the server.  Doing so may cause 

loss of unsaved data, and may require the RAID drive array to re-synchronize – a process that 
could take several hours.  Shutdown the system 

only

 by momentarily pressing the front panel 

Reset

 button, or through the GUI. 

The 

Quick Restart

 option in the 

Start>Shutdown

 menu allows the GUI and video playback 

application to be restarted without restarting the entire operating system.  

The 

Restart FTP Only

 option will restart the FTP service without affecting video operation. 

Содержание MAXX-1200-EX





















































































































































Отзывы:

Нет отзывов