Page 38
MAXX-1200 Owner’s Manual
Making a Recording from the GUI
Video recordings are made using the Transport View of
Channel 1
. Channel 1 can record or play
clips, but cannot do both at the same time. Channels 2 and 3 are playback only. Use the
following steps to make a recording. Most of the configuration settings can be skipped once a
workflow is established.
Record Configuration Options
If necessary, set Channel 1 to the Transport View. Click
FILE >TRANSPORT
in the Channel 1
Playlist View to switch to the Transport View.
Setting the Video Bit Rate
Select
OPTIONS >CONFIGURE
from the Channel 1 Transport Window. The Dialog box in Figure 5
appears.
•
In the window, enter the desired Video Bit Rate (in Megabits/sec), not to exceed 125.
Alternatively, use the up/down arrows to set a number.
•
Click
APPLY
or
OK
.
Figure 5 - Channel Configuration Dialog
The recommended bit rate is 70 to 80 Mb/s, especially for applications requiring file transfer while
all three channels may be in use. Rates over 100 should be used only for applications requiring
reproduction of very high detail material.
Содержание MAXX-1200-EX
Страница 1: ...O P E R A T I O N Smanual ...
Страница 3: ...Page 2 MAXX 1200 Owner s Manual ...
Страница 9: ......
Страница 144: ...MAXX 1200 Owner s Manual Page 143 Appendix F Mechanical Drawing Figure 32 Dimensional Drawing ...
