Insert 5/8” X 3” bolt
25
through the disk
26
. Insert bushing
27
(large side first) and hose guide assembly
28
(ear tab
29
facing in).
Slide bolt of the disk assembly into the lower hole on the
bandit
25
, aligning the ear tab
29
with corresponding upper
hole and secure with lock nut.
Tighten with 15/16” socket and wrench.
Using a mallet, install provided dust caps over disk bolt
heads.
Route application hose through hole in top of 360 BANDIT
frame
30
.
Repeat for other side.
Using 15/16” socket and wrench, reinstall closing wheels.
NOTE: If the optional Chain Kit is being installed, do not
reinstall the closing wheels.
Install orifice plates
31
in the rubber grommets
32
.
Assemble pluming components in the arrangement shown
above
33
.
Attach the plumbing assembly to each of the hoses coming
from the house guides
34
.
NOTE: If hoses are not fully seated in the push to connect,
they will leak. Hoses seat 7/8” of an inch deep or until you
hear a snap.
The supplied push to connect adapter in the 360 BANDIT kit
connects to 3/8” push to connect compatible hose.
Secure hoses to row unit with provided zip ties.
INSTALLATION INSTRUCTIONS
KINZE 3000
STEP 9
INSTALL DISK ASSEMBLY
STEP 10
ASSEMBLE PLUMBING
32
32
23
34
34
PLUMBING RECOMMENDATIONS:
To prevent excess fertilizer from dribbling out of the hoses
when product application is shut off, install one push to
connect polypropylene (Inlet x Outlet) 3/8” O.D. check valve
(not included) in the plumbing to each row prior to the 360
BANDIT orifices. Check valve is available at Dultmeier Sales
(Item #BUCV1103-P38).
A 50 mesh strainer (not included) can be used in the
complete plumbing system between tanks and 360
BANDIT to help prevent debris from blocking orifices.
INSTALLATION COMPLETE
27
28
29
25
29
25
26
PAGE 5
30
Содержание BANDIT KINZE 3000
Страница 6: ......
