2Wire HomePortal 1500CW, Руководство пользователя

Страница: 17 / 78

Chapter 2:
Installing HomePortal hardware
2
-3
Choice 1: Computer with Ethernet connection
To connect your computer to the HomePortal via Ethernet:
1.
Verify the computer has an Ethernet card.
If you are not sure whether your computer has an Ethernet card, see
“Troubleshooting installation” on page 9-1.
2.
Making sure the round connector is lined up correctly, plug the black AC
power adapter into the HomePortal
POWER
port (bottom plug) and then
plug the other end into an electrical outlet.
The green Power light on the front of the HomePortal should come on.
3.
page 8-1 Recommended: If any of the computers in your home today or in
the future will connect to your home network via HomePNA, connect the
included light-gray telephone cable from the HomePortal
LINE
port (top
plug) to the telephone jack (should have dial tone).
4.
Connect the other included light-gray telephone cable from the
HomePortal
DSL
port (2nd plug from top) to the DSL service wall jack.
This connects the HomePortal’s internal DSL modem to your DSL service
provider. If you already have an external DSL modem, you no longer need to
use it.