2Wire HomePortal 1000HW, Руководство по установке

Страница: 9 / 44

5
.
1.
Connect the provided AC power adapter from the HomePortal’s
POWER
port to an electrical outlet.
The green
POWER
light on the front of the HomePortal should come on.
2.
Connect the
yellow Ethernet cable
provided with the HomePortal from the
ETHERNET
port on the
HomePortal to your computer’s Ethernet port.
3.
Connect the
gray telephone cable
provided with the HomePortal from the
PHONE LINE
port on the
HomePortal to a telephone jack with DSL service.
This connects the HomePortal’s internal DSL modem to your DSL service provider and sets up your
home network for home phoneline (HomePNA) networking. If you have been using an external DSL
modem, you will no longer need it.
Check your connections
With your computer completely started, verify the
POWER
and
LOCAL NETWORK
indicator lights on the
front of the HomePortal are green. If they are not, see “Diagnosing connection problems” on page 20. The
BROADBAND LINK
indicator light will not turn green until the HomePortal software has been installed and
an Internet connection has been established.
Continue from here to Step 3 “Install the HomePortal Software” on page 13.
Ethernet Connection
Requires a computer with an Ethernet port