2VV SAV-2-AC Скачать руководство пользователя

Страница: 2 / 22

2VV.

Creating innovative solutions for you and your business since 1995.

ver.2 09-12-19

1. BEFORE YOU START

This manual includes important instructions for correct installation of

SAVANA

Heat units. Be-

fore installation of the heater unit, please read and follow all the instructions below! The man-

ufacturer reserves the right to make changes to the technical documentation without previ-

ous notification. Please save the manual for further use. Instructions in this manual should be

considered integral part of the product

EC DECLARATION OF CONFORMITY

This manual includes important instructions for correct connection of the ventilation unit. Before connect-

ing the unit, please read and follow all the instructions below! The manufacturer reserves the right to make

changes, including the technical documentation, without previous notification. Please save the manual for

further use. Instructions in this manual should be considered integral part of the product

For current and full version of the EC Declaration of Conformity see www.2vv.cz.

Symbols are used in the text for better orientation in the user’s manual.

Following table includes their illustration and meaning:

Symbol

Meaning

ATTENTION!

Warning or notification

NOTE WELL!

Important instructions

YOU WILL NEED

Practical tips and information

TECHNICAL INFORMATION

Detail technical information

Link to other section/part of the manual

Содержание SAV-2-AC























Результаты поиска

Содержание SAV-2-AC

Отзывы:

Похожие инструкции для SAV-2-AC

Бренды по названию

Популярные бренды

2VV SAV-2-AC, Инструкция по установке и эксплуатации

Результаты поиска

Содержание SAV-2-AC

Отзывы:

Похожие инструкции для SAV-2-AC

Бренды по названию

Популярные бренды