2VV FINESSE, Руководство по установке

Страница: 18 / 35

18
•
The air curtain must be pRotected by an appropriate circuit breaker, in accordance with its electrical
parameters. For safety reasons, over-designed protection is not recommended.
•
The air curtain must be connected using the TN-S system, which means that the neutral conductor
must always be connected.
•
A main cut-off switch must be placed in the electrical supply network, disconnecting all poles of the
network.
•
The electrical enclosure of the air curtain is IP 20.
FINESSE air curtains are equipped with a fuse (with T characteristic – slow-blow). This safety fuse pRo-
tects the electronic panel and fans. It is located under the service cover next to the main power supply
connectors.
6. 5 CONTROL MODULES
Air curtains FINESSE are produced with universal connection interface.
Air curtains FINESSE can be controlled by one of following control modules: BASIC, COMFORT,
SUPERIOR.
Control modules are required accessories and has to be orderot separatelly.
Air curtain is connected with control module by „Quick connection sockets“
•
The electrical parameters are shown
on the manufacturer‘s label, which is
located under the air curtain‘s service
cover.
6. INSTALLATION