2VV ESSENSSE NEO COMFORT, Инструкция по установке и эксплуатации

Страница: 12 / 21

12
Electric connection – Option 1:
MENU - OTHER SETTINGS
Use this menu to set the remaining parameters
Ad 1)
Ad 1) – Sets the CAN address of the control panel so up to 2 control panels
may be connected to the MASTER regulator
Options: CP 1 = control panel’s address is 1
CP 2 = control panel’s address is 2
Enable/disable automatic
switch of
summer/winter time
CP 1 CP 2
ATTENTION!
Each panel must have its own address,
otherwise it may result in the malfunction of the regulator.
Terminals must be set if multiple panels are to be connected. They are found in the main electronics and
the controller:
Terminal settings
Example of controller connection – Option 1:
ON
ON
CP 1 CP 2
ON
ON
ON
ON OFF
OFF
Electric connection – Option 2:
CP 1 CP 2
CP 1 CP 2
CANH
CANL
GND
+12V
ON
ON ON
ON
Electric connection – Option 2:
OFF
OFF
Ad 1) – Use one door contact as main. Its status will be sent to the
SLAVE regulators and it will no longer be necessary to connect it to each
regulator, if required.
Not allowed = the door contact will not transmit to the SLAVE regulator from the MASTER
Allowed = the door contact will transmit to the SLAVE regulator from the MASTER
Ad 2) – Activates in the main screen the icon to turn
each SLAVE regulator ON/OFF If inactive, all the SLAVE
regulators will be turned on or off simultaneously
Not allowed = The SLAVE regulators are turned on/off simultaneously
Allowed = The SLAVE regulators can be turned on/off individually
form the main screen