2VV ESSENSSE NEO COMFORT, Инструкция по установке и эксплуатации

Страница: 11 / 21

11
MENU - TEMPERATURE SENSOR
MENU - USER LOCK
MENU - SUMMER HEATING
Timed rundown
MENU - DOOR CONTACT
Limit level – see Ad1)
Enter PIN 0000~9999
(numeric values only)
Use this menu to set the limits to control the regulator with a
multi-level panel
Use this menu to set heating limits in summer months
Winter mode set by default. Enabling the function allows heating also
in summer
Use this menu to set the behaviour of the regulator according to the
door contact
Options:
None – Limit inactive
On/Off – Only On/Off and access to the information menu are
enabled in the main screen
On/Off, Temp, Flow – On/Off, the information menu,
and temperature and air flow settings can be accessed without
password.
Full – Only the information menu can be accessed without password
User mode – Special user mode, see image below
End of winter period
(month number)
Mode:
Fixed
Start of winter
period (month number)
Enable/disable
function
Enable/disable
function
Fixed mode settings
Ventilation rate with
open doors
(33%-100%)
Heating settings with
open doors
Manual = 0%, 50%, 100%
Timed rundown at minimum
speed: 5s ~ 300s
Detailed settings
of the rundown
function
Rundown function:
Disable
Time interval
Temperature (when
reaching a temperature on
the thermostat)
4. CONTROL
MENU - SUBUNITS
Use this menu to set the behaviour of the IC-S regulators
connected as SLAVE
Number of SLAVE
regulators:
0 ~ 10
Ad 1)
Ad 2)
Heat open door 0%
Slave address parameter:
ADDRESS SLAVE UNIT ADDRESS SLAVE UNIT
1 1 6 6
2 2 7 7
3 3 8 8
4 4 9 9
5 5 A 10