14
15
2VV.
Creating innovative solutions for you and your business since 1995.
ver.1 31-05-21
After unscrewing the screw, remove the cover.
The unit must be connected with a NT-S system, mean
-
ing that the neutral conductor must be always connected
.
All the phases of the power supply must be connected
through the appropriate type of circuit breaker. The
distance between open contacts must be greater than 3
mm.
The unit must be connected in a way that it may be dis
-
connected from the power supply with a single switch.
Recommended breakers:
6.5-1 Electrical fittings
Connect the unit electrical fittings to the terminal inside
the regulator box exactly according to the el. diagram for
connection and according to the markings of the termi
-
nals.
DO NOT MISS!
•
The connection diagram is glued to the internal side of
the removable lid of the regulator box.
•
Each element must be connected using an original ca
-
ble or cable as per the specification for each element.
•
To open the lid of the regulator box you will need
TORX22 key. See picture.
6. INSTALLATION
L
sup
N PE
L1 L2 L3 N PE
230V AC
400V AC
A
Electronics board - module A
1
Terminal block for power supply (L), connection
of N and PE cables and output of auxiliary power
supply (24V)
2
The power supply (12V, 24V)
3
Engine fuse
4
Fuse for accessories
5
Servo drive by-pass
A
A
11
22
33
55
44
HRDF1-030... XS0C
2A, 1ph
HRDF1-030... ES0C
8A, 1ph
HRDF1-030... EE1C
13A, 1ph
HRDF1-050... XS0C
2A, 1ph
HRDF1-050... ES0C
13A, 1ph
HRDF1-050... EE1C
16A, 1ph
HRDF1-070... XS0C
3A, 1ph
HRDF1-070... ES0C
16A, 1ph
HRDF1-070... EE1C
8A, 3ph
