14
15
MENU 02 - HW SETTING
MENU 06 - FILTER TIMER
Digital input (15-16)
fire input
You can choose the
logic of the RUN
contact
You can choose the
contact to switch the
PIR sensor or the FIRE
contact
This menu lets you set the logic using the digital input and RUN
output.
•
Input (15-16) – Lets you choose to control the unit with the
movement sensor or as a fire contact. In case of fire, the be-
havior of the unit can be set (settings in service menu no. 09)
•
Output (7-8) – Lets you set the logic of the RUN contact
switch as follows: N.close (normally closed) or N.Open (nor-
mally open)
Status to notify
filter clogging
control
Set the maximum
number of hours to
notify filter clogging
control (depends on
the environment of the
installation)
Reset filter clog-
ging control timer
(use when chang-
ing the filter)
MENU 08 - AQS SENSOR
Select air
quality
sensor
Set the limit
of the chose
air quality
sensor
MENU 09 - TEMPERATURE SENSOR
You can choose the
output temperature
sensor to control
the unit.
Supply duct:
Temperature sensor at the fresh air intake
Extract duct:
Temperature sensor at the exhaust air
Room:
Room temperature sensor (optional)
06 - Filter timer
25 - Factory reset
08 - AQS Sensor
03 - Filter timer
04 - AQS Sensor
05 - Temperature sensor
06
08
09
06 - Filter timer
08 - AQS Sensor
09 - Temperature sensor
10 - Supply Duct Limits
09 - Temperature sensor
06 - Filter timer
08 - AQS Sensor
10 - Supply Duct Limits
11 - Bypass Temperature
