2VV AirGENIO, Инструкции по сборке, установке и эксплуатации

Страница: 3 / 10

4
2VV. Creating innovative solutions for you and your business since 1995.
ABOUT THE MANUAL
Symbol Meaning
WARNING – these symbols warn about factors that may cause serious injury to the user or damage to the device. They
also draw attention to important instructions, properties, procedures or measures that must be taken into account or
abided by during operation and maintenance.
ATTENTION – this symbol draws attention to an important activity or information that must be taken into account, but one
that will not endanger health or damage the device.
INFORMATION – this symbol draws attention to useful information about the device
This manual was written to provide necessary information about the AirGENIO BASIC EC controller concerning its oper-
ation, maintenance and service. Authorized persons must be thoroughly familiar with the contents of the manual before
beginning any work with the device.
Declaration of conformity
The product has been designed, produced an marketed in compliance with all the applicable provisions, and abides to the
provisions of the European Parliament and Council, including the amendments under which it has been classified. It is safe
under normal conditions and under the conditions laid down by the manual. The assessment was conducted pursuant to
harmonized European standards included in the relevant EC Declaration of Conformity. The current and full version of the
EC Declaration of Conformity can be found at www.2vv.cz
IMPORTANT WARNINGS
▪ Read this manual carefully.
▪ Proceed exactly according to the instructions stated here in order to install controller properly and safely.
▪ Do not put the device into operation unless you are thoroughly acquainted with all the instructions, warnings and
recommendations.
▪ Illustrations used in this manual may not always correspond to reality; their purpose is to help in understanding the
installation steps. Texts, drawings, photos and other elements used here are, however, protected by copyright. Their
abuse or unauthorised copying is a punishable offence.
▪ The manual must be considered an integral and inseparable part of the controller. Store it for future use and pass it
on to any future owners.
▪ Avoid contacts with energised electrical parts; always treat the product as if it is live. Always disconnect the power
supply before connecting, servicing or repairing the product
▪ Always verify that you apply appropriate power supply to the product and use appropriate wire size and characteris-
tics. Make sure that all the screws are well tightened.
MANUFACTURER’S CONTACT INFORMATION
Unexpected situations may occur in practice that could not be included and described in this manual. When in doubt about how to
proceed, contact the manufacturer:
2VV, s.r.o.
Fáblovka 568,
533 52 Pardubice,
Czech Republic
T: +420 466 741 811
E: 2vv@2vv.cz
W: www.2vv.cz
DELIVERY AND UNPACKING
PACKAGING AND CONTENTS OF THE DELIVERY
The controller is supplied as a single, complete whole, packaged to protect it against damage. The controller is transported in a card-
board box to protect the device from damage.
The delivery includes the following:
▪ Transport packaging
▪ Controller (1×)
▪ Instructions for Quick Installation and Safe Use of controller