2T Technology Voyager Voice Sleek, Инструкция по установке и эксплуатации

Страница: 17 / 28

17
The message will go to the number programmed in Phone 1, unless the
Control Phone is programmed (See section on ‘Program the Control
Phone’ in the next section). In which case the message will go to the
Control Phone.
Now when the gate or door is opened the number will receive the
“Access open” SMS Text automatically.
Set Ring and Talk Time for Outgoing Calls
The device is configured with two timers. The first controls the ring
time, i.e. how long the phone being called, will ring for, while the second
controls how long the person answering at the phone being called, can
talk for.
The defaults for these times are: Ring Time: 20 seconds, Talk Time:
40 seconds. To change these settings use the following commands.
Text to Send Response Result
Ring Time xx Ring Timer set to
xx Seconds The time in seconds that the
GSM device will wait for an
answer is controlled with this.
Talk time xx Talk time xx The time in seconds that the
GSM device will allow for in
the call is controlled with this.
Force the Intercom to Operate on 3G only.
Audio quality is better on 3G networks due to the technology used. On
occasions then, it may prove necessary to force the device to remain on
the 3G network even if 3G signal levels are low.
Text to Send Response Result
Stick on GSM Stick on
3G On The GSM device will remain on the 3G
network even though there may be a
stronger 2G signal available.
Stick off GSM Stick on
3G Off The unit can switch to 2G if a stronger
signal is available.