Using DECT Handsets with Your Phone
179
The phone is during a call, and the satellite mode is selected as
Take over call
. And make sure there is only one
call on the phone.
Procedure
1.
Swipe the soft key area left and then tap
Call Shift
.
The call is automatically connected on the handset.
Related Topic
Selecting a Handset to Use the Satellite Mode
Pull an Active Call from the Handset
You can retrieve the call from the handset to the phone after off-hook.
Before You Begin
The handset is during a call, and the satellite mode is selected as
Take over call
. And make sure there is only one
call on the handset.
Procedure
1.
Do one of the following:
l
Pick up the handset.
l
Press the Speakerphone key
.
l
Select the line key, and then select
Call Pull
.
The call is connected to the phone.
Related Topic
Selecting a Handset to Use the Satellite Mode
Shared Directory
Users can manage contacts and use them on the phone and all registered handsets. You can store up to 1000 con-
tacts in your phone’s shared directory.
Check with your system administrator to find out if this feature is available on your phone.
Note
: For more information on how to bind a handset, refer to
Selecting a Handset to Use the Satellite Mode
.
Topics
Adding Shared Contacts
Viewing Shared Contacts
Editing Shared Contacts
Deleting a Shared Contact
Deleting All Shared Contacts
Searching for Shared Directory Contacts
Moving a Shared Contact to the Blocklist Directory
Saving a Shared Contact to the Local Directory
Placing a Call from the Shared Directory
Adding Shared Contacts
When you add a contact to your Shared Directory, you can set the desired information for your contact. You are
required to enter a contact name at least for each new contact.
Procedure
Yealink T58W User Guide