2N SpeedRoute Скачать руководство пользователя страница 29

Страница: 29 / 101

Table of Programmable Parameters

3.2

The menu helps you read the messages including such details as the SMS

addressee. To delete a message, select it and push the

Delete

button. To move

between the pages use the page numbers in the upper part of the screen.

Trash

The

Trash

folder displays the SMS messages that have been deleted from other

sections. This storage is an intermediate step before deleting SMS from the user-

accessible storage areas to avoid unintentional deletions. The menu helps you

read the messages including such details as the SMS sender or addressee. To

delete a message, select it and push the

Delete

button. To move between the

pages use the page numbers in the upper part of the screen. An SMS deleted here

is moved to the storage of deleted SMS and, together with the other SMS

messages, deleted automatically when the assigned data space is filled up.

Errors

The

Errors

folder displays the SMS messages that failed to be sent. The menu

helps you read the messages including such details as the SMS addressee. To

delete a message, select it and push the

Delete

button. To move between the

pages use the page numbers in the upper part of the screen.

SETUP Menu > Cellular

SIM

ICCID

Unique serial numbers of the mobile providers’ SIM cards. There are no identical

numbers at the same time. They start with 8942 for the Czech Republic and have

19 positions altogether.

IMSI

The IMSI (International Mobile Subscriber Identity) is a unique worldwide

identifier of the SIM card inserted.

Type

Type of the SIM card inserted. Options:

SIM

USIM

, or

Unknown

when

SpeedRoute cannot identify the SIM card.

Status

Status of the SIM card inserted. Some statuses are rather rare and so the most

important SIM card statuses are mentioned only.

Unknown

SIM card is not available.

Ready

SIM card is functional and ready for use.

SIM PIN

SIM card is PIN-secured; enter the PIN.

SIM PUK

SIM card has been blocked by entering an invalid PIN;

enter the PUK for unblocking.

The other potential statuses should not normally occur.

Содержание SpeedRoute






































































































Результаты поиска

Содержание SpeedRoute

Отзывы:

Бренды по названию

Популярные бренды

2N SpeedRoute, Руководство пользователя

Результаты поиска

Содержание SpeedRoute

Отзывы:

Бренды по названию

Популярные бренды