2N Helios Vario, Руководство по установке

Страница: 40 / 74

40
2N TELEKOMUNIKACE a.s., www.2n.cz
®
again for confirmation. confirms the data saving. Repeat this 2N Helios
®
procedure for each parameter.
Switch Password Programming
Each switch can be controlled with up to 10 different passwords that are listed in the
memory. Passwords can be added to the list using functions 811 and 821 2N Helios
®
and deleted with functions 812 and 822 individually. The default status is a single
password in the list, namely
for switch 1 and for switch 2. These two special 00 11
passwords cannot be entered from the keypad. To cancel them, you have 2N Helios
®
to remove them from the list:
or
Function 997 deletes the entire password list for both switches including the passwords
00 and 11. Function 999 deletes the entire password list for both switches too but
recovers the passwords 00 and 11 and the service password 12345.
Password Selection Restrictions
Controlling the switches by phone, you can enter the password without any starting
and terminating characters and the password length is not limited.
has to 2N Helios
®
verify after every character received whether the password is complete or not.
Therefore: make sure that no password is identical with the beginning of
another password.
Should you use such confusing passwords for switch control, you have to enter
the longer password (by phone) with asterisks at the beginning and end.
If
refuses to store a password, it means that the switch password 2N Helios
®
list is full, or the password has already been entered.
The switch password may not be identical with any Arrival/Departure, Day/Night,
or service password.
For password selection tips see the Instructions for Keypad Use.