2N® TELEKOMUNIKACE a.s., http://wiki.2n.cz
Page 4
How to configure
Helios IP intercom – FW version 2.5
2N
®
and older
Configuration of
intercom is very simple. Go to section "Basic settings – Switch 1" and verify that
Helios IP
2N
®
this switch is enabled. Then you have to choose appropriate "Output relay" to which is
Helios IP Security
2N
®
connected and set "Output type" to "Security" mode. After that you can also specify codes that will activate
Relay
the switch as is shown in the picture below.
