2N EasyGate Pro, Руководство пользователя

Страница: 68 / 87

User Guide 2N® EasyGate PRO
68 / 87
•
•
Automatic PIN Entering
You need not enter the PIN upon power up if it is stored in EasyGate – it is entered automatically.
This function is convenient in case of power failure; EasyGate is operable in a short time after
power recovery without any intervention by the operating staff.
4.6 Free minutes option
Basic description
With Firmware 3.5x only!
Free minutes option allows user to control amount of minutes used for four groups of operators
in one month period. The user than knows, if performed calls are included in free minutes
bundle, or if he has to pay extra price for it. Calls for extra price can be disabled. All setting done
by customer is accessible by DTMF setting.
Setting of prefixes (operators) in four banks can be changed using PCManager. This setting, the
amount of free minutes in every bank and rules for time counting are preset from factory.
Programming of parameters is done the same way like programming of all other gateway
parameters. To change free minutes option parameters, you can either:
Use the DTMF programming on a telephone line. There are parameters, which can be
programmed using telephone line based programming with password access as described
in part 3.1 and commands with direct access, used the same way as command for
configuration of network services as described in part 4.1.
Use a PC with the PCManager installed.
Parameters – password access
Call with empty bank permitted (Function No.: 310)
The call with empty Bank is either disabled or permitted. When the bank is empty, you hear after
dial refusing tone. With call disabled is followed by Busy tone and the call can’t be established.
With call permitted you can hang up the call, otherwise the call is established and charged.
Setting options: 0/1 (disabled / permitted)
•
Warning
One PIN entering option is exhausted by the attempt to enter the PN
automatically upon SIM card or PIN change. If wrong, the automatically entered
PIN is cleared from the internal memory to avoid another false attempt upon next
power on. There are still two manual PIN-entering attempts after such
unsuccessful automatic entering. To prevent the unsuccessful automatic PIN
entering, delete or program properly the EasyGate PIN using the PCManager in the
case of SIM card change.
