2N 1120101B Скачать руководство пользователя страница 32

Страница: 32 / 68

Download Fail Check

Times

If the download fails, the phone will retry with the configured times.

Update Contact Interval

The phone will update the phonebook with the configured interval. If it is 0,

the feature is disabled.

Save Auto Provision

Information

Save the HTTP/HTTPS/FTP username and password. If the provision URL

is kept, the information will be kept.

Download Common

Config enabled

The phone will download the common configuration file.

Enable Server Digest

When the feature is enabled and if the server configuration has been

changed, the phone will download and update.

DHCP Option

Option Value

Configure DHCP option: DHCP option supports DHCP custom option |

DHCP option 66 | DHCP option 43 - 3 methods to get the provision URL.

The default is Option 66.

Custom Option Value

Custom Option value is allowed from 128 to 254. The option value must be

the same as defined on the server.

Enable DHCP Option 120

Use Option120 to get the SIP server address from the DHCP server.

SIP Plug and Play (PnP)

Enable SIP PnP

Enable/disable PnP. If PnP is enabled, the phone will send a SIP

SUBSCRIBE message with a broadcast method. Any server that supports

the feature will respond and send a Notify with URL to the phone. The

phone could get the configuration file with the URL.

Server Address

Broadcast address. It is 224.0.0.0 by default.

Server Port

PnP port

Transport Protocol

PnP protocol: TCP or UDP

Update Interval

PnP message interval

Static Provisioning Server

Server Address

Server address provisioning. Supports both IP address and Domain

address.

Configuration File Name

Configuration file name. If it is empty, the phone will request the common

file and device file which is named as its MAC address.

The file name could be a common name, $mac.cfg, $input.cfg. The file

format supports CFG/TXT/XML.

Protocol Type

Transferring protocol type: FTP, TFTP, HTTP and HTTPS.

Update Interval

Configuration file update interval time. It is 1 by default, which means that

the phone will check the update every 1 hour.

Update Mode

Provision Mode

Содержание 1120101B





































































Результаты поиска

Содержание 1120101B

Отзывы:

Бренды по названию

Популярные бренды

2N 1120101B, Руководство пользователя

Результаты поиска

Содержание 1120101B

Отзывы:

Бренды по названию

Популярные бренды