2N Telekomunikace NetSpeaker, Руководство пользователя

Страница: 20 / 39

Electric Installation 2.4
20
Warning

Do not exceed the maximum voltage values (24V) applied to the LOGIC
IN input to avoid irreversible damage of the equipment.
Note

The current 2N
®
NetSpeaker FW version does not support this function.
Refer to www.2n.cz for 2N
®
NetSpeaker FW updates. Contact the 2N
TELEKOMUNIKACE Technical Support staff please for more information.
Memory Card Use
2N
®
NetSpeaker is equipped with a MicroSD card slot for storing music or voice in case
the equipment is not connected to the LAN permanently or temporarily.
The MicroSD card slot is available on the 2N
®
NetSpeaker front panel.
Note

The current 2N
®
NetSpeaker FW version does not support this function.
Refer to www.2n.cz for 2N
®
NetSpeaker FW updates. Contact the 2N
TELEKOMUNIKACE Technical Support staff please for more information.
LAN Connection
2N
®
NetSpeaker can be connected to a standard local area network using a LAN
interface via the RJ-45 connector on the back panel. Always use CAT-5d or higher
class cables for reliability reasons.