2N Telekomunikace NetSpeaker, Руководство пользователя

Страница: 26 / 39

2N® NetSpeaker Configuration
3.1
26
help
This command displays the list of available commands.
set [parameter] [value]
This command sets the parameter to a selected value. Example: set dhcpclient 1
get [parameter]
This command displays the current parameter value. Example: get dhcpclient
print
This command writes out all parameters including values.
save
This command saves all parameters changes into the 2N
®
NetSpeaker memory.
exit
This command quits connection with the Telnet server.
reboot
This command resets the equipment.
List of Parameters
dhcpclient
This parameter enables/disables automatic obtaining network parameter settings
from the DHCP server in the LAN.
Setting options
0 Automatic network parameter obtaining is
disabled. Use manual settings: ipaddr, netmask and
defaultgw.
1 Automatic network parameter obtaining is
enabled.
Default setting: 0
ipaddr
2N
®
NetSpeaker static IP address. Use this setting if dhcpclient is set to 0.
Default setting:
192.168.1.100
netmask
Network mask for static IP address setting. Use this setting if dhcpclient is set to
0.
Default setting:
255.255.255.0