2GO DELUXE, Руководство по эксплуатации, Страница: 8 / 20

Pairing the headset with a Bluetooth phone
Make sure that the headset is turned off and that the distance between the headset and the
phone is no more than one meter. Then activate the Bluetooth function on the phone. Remove
the two earphones from the charging box to turn them on. Wait for about 10 seconds - The
earphones will now pair automatically. The headset then automatically switches to pairing
mode so that the connection to your mobile device can be established. Open the Bluetooth
settings of your mobile device and search for new devices. Select “2GO Deluxe“ to establish
the connection.
If the Bluetooth connection to your phone has been interrupted, it will be restored automatical-
ly as soon as you switch the headset on again within the operating range.
Answering a call
When a call comes in, you hear a ring tone. You have two options to accept an incoming call:
Method 1: Press the Power button once.
Method 2: Accept the call via your telephone.
Ending a call
You have two options to end a call:
Method 1: Press the Power button once. The message (on-hook) sounds.
Method 2: End the call from your phone.
Rejecting a call
Press and hold the Power button for two seconds to reject a call. A message sounds (call
rejected).
Redialing
In STANDBY or MUSIC MODE, press the Power button twice to automatically redial the last
number dialed on the phone. The headset automatically calls the last contact dialed (callback).
Music Play/Pause
In STANDBY MODE, briefly press the Power button once to start playing music.
In music playback mode, briefly press the Power button once to pause music playback.
Select music
Press the Power button twice on the right side to play the next song.
Press the Power button twice on the left side to play the previous song.
Voice control
Press the Power button for 1 second on the left side to start the voice control on the mobile
phone.
Resetting the headset
In Power OFF, press the Power button for about 10 seconds. The headset switches to Power
ON after 2 seconds. After a further 3 seconds, the headset switches off again and the status
LED flashes red 4 times. After a further 5 seconds, existing couplings are deleted, the status
LED flashes red/blue twice.