manualshive.com logo in svg

2gig Technologies GO!control 2GIG-CNTRL2, Руководство пользователя

Поделиться
Скачать
2gig Technologies GO!control 2GIG-CNTRL2 Скачать руководство пользователя страница 19

17

Wireless Keypad Arming and Disarming

Your system may be equipped with one or more wireless keypads. Up 
to four wireless keypads can be used to control the system remotely 
from the main Control Panel.

Two types of wireless keypads are available. The standard 
wireless keypad, and the wireless touch screen keypad. 
The wireless touch screen keypad operates virtually the 
same as the Control Panel. Use the following instructions for 
operating the standard wireless keypad.

Each standard wireless keypad has buttons for entering User Codes, 

STAY

 and 

AWAY

 mode buttons, and 

FIRE

 and 

POLICE

 emergency 

buttons.

Check the Installer Set Options section at the rear of this manual 
to verify which 24-hour 

FIRE

 and 

POLICE

 emergency buttons have 

been enabled by the installer:

 Wireless Keypad Arming to Stay Mode

• To arm the system to Stay Mode using a wireless keypad, enter a User Code and press the 

STAY

 button. (If Quick Arming has been allowed by the installer, just press the  

STAY

 button.)

✓ 

NOTE: 

If there are open 

perimeter

 doors or windows, the system will not allow arming to Stay 

Mode with a wireless keypad. All open sensors must be bypassed at the Control Panel fi rst.

 Wireless Keypad Arming to Away Mode

• To arm the system to Away Mode using a wireless keypad, enter a User Code and press the 

AWAY

 button. (If Quick Arming has been allowed by the installer, just press the  

AWAY

 button.)

✓ 

NOTE: 

If there are open 

perimeter

 doors or windows, the system will not allow arming to 

Away Mode with a wireless keypad. All open sensor-protected doors and windows must 
either be closed or bypassed at the Control Panel before arming with a wireless keypad.

 Wireless Keypad Disarming

• To disarm the system from Stay or Away Mode using a wireless keypad, just enter a User Code.

 Wireless Keypad Fire Emergency

• To trigger a emergency fi re alarm using a wireless keypad, press the  

FIRE

 

button for two seconds. (This option must be enabled by the installer.)

 Wireless Keypad Police Emergency

• To trigger a emergency police (panic) alarm using a wireless keypad, press the 

 

POLICE

 button for two seconds. (This option must be enabled by the installer.)

 Burglary Protection

Standard Wireless Keypad

Wireless Touch Screen Keypad

Содержание GO!control 2GIG-CNTRL2

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды