manualshive.com logo in svg

2gig Technologies GO!control 2GIG-CNTRL2, Руководство пользователя

Поделиться
Скачать
2gig Technologies GO!control 2GIG-CNTRL2 Скачать руководство пользователя страница 17

15

If a Burglary Alarm Occurs

If an armed sensor is tripped while the system is armed in the Stay or Away Mode, 

an alarm will 

occur and the siren will sound.

 Delayed sensors will start the Entry Delay to allow time to disarm 

the system. Instant sensors trigger the alarm right away. Most sensors will trigger the alarm siren, 
some sensors may be set to trigger a silent alarm without sounding the siren.

Burglary Alarm  Siren

If there is a burglary alarm tripped while the system is armed, the Control Panel will sound the alarm 
siren for a preset time (see Installer Set Options). After the time expires, the siren will stop sounding.

The system limits the number of times a sensor can re-trigger an alarm while the system is armed. 
The setting is one to six times per sensor, per arming period (see Installer Set Options).

Alarm Memory

If an alarm has occurred while the system was armed, the  Disarm Screen will show the time and date 
of the alarm and the sensor(s) that triggered the alarm.

After the system is disarmed, the Alarm Memory screen will be displayed. The  Alarm Memory Screen 
shows the sensor(s) that have caused the alarm. If more than one sensor has been triggered, the 
display will show the order that alarms occurred. 

The alarm memory will automatically clear 

the next time the system is armed.

 You can also check the  

CLEAR ALARM HISTORY

 button and 

press 

OK

 to manually clear the alarm memory (24-hour fi re and CO sensors that are still violated will 

remain in alarm memory).

Anytime there are events stored in alarm 
memory, the Security Screen will display the

 

button. The number on the button is the 

number of sensors that triggered during the 
alarm (remains until acknowledged). Press the

 

button to view the Alarm Memory Screen.

Optional 2-Way Voice Communications

2-way voice communications provides a method for alarm verifi cation and can provide emergency 
assistance. The Control Panel contains a built-in microphone that can monitor sounds around the area 
of the Control Panel. The built-in  microphone and speaker allows 2-way voice communications with 
a Central Station operator after an alarm. The operator can converse with people in the premises 
through the Control Panel’s  speaker and microphone.

Your installer can set the system to use 2-way voice communications after an alarm and/or after a 
panic alarm is triggered.

✓ 

NOTE: 

If a panic alarm or sensor is set for a silent alarm, the operator will only be able 

to listen and not be able to talk. This is for your protection.

 Burglary Protection

Disarm Screen Showing Alarms

Alarm Memory Screen

Security Screen with Alarm Memory Button

Alarm 

Memory 

Button

Содержание GO!control 2GIG-CNTRL2

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды