7
Basic Operation
Multi-level Switches
Multi-level (dimmer) switch modules can be
turned ON, OFF, or set to 12 different dimming
levels.
To control a multi-level switch module, use the
following steps:
1.
From the Home Screen press the
HOME
SERVICES
button.
2.
From the Manage Z-Wave Devices Screen, press
the
SWITCHES
button.
3.
A list of all installed switches will be displayed.
If there are more than three switches, use the
↑
or
↓
arrows to scroll the list. On the right side
of the switch button, multi-level switches will
display the current status of the switch (OFF or
bars showing the dimming level).
✓
NOTE:
If the light is controlled at the
module while the Control Panel is showing
this display, press the
REFRESH
button to
update the display.
4.
Press the display where the device is listed to
display the control buttons for the switch.
5.
A check box indicates if the switch is OFF or
ON. If the switch is ON, the dimming level with
a number 1-12 will be shown below the check
boxes. Press the desired action for the switch;
OFF, ON, or adjust the dimming level using the
brightness buttons at each end of the dimming
level display. The lamp connected to the
selected multi-level switch module will follow
your command.
6.
Press the
BACK
button three times or the
button on the Control Panel to exit Home
Services.
Manage Z-Wave Devices Screen
Press
SWITCHES
button
Installed Switches Shown
Press device
button
Multi-level Switch Settings Display
Set device Off or On
Choose
dimmer level